Views:70 Author:Site Editor Publish Time: 2020-05-14 Origin:Site
When you brake the car with your foot, the brake light will be turn on. And the brake light is divided into two categories which are left and right brake lights and high brake lights. Usually the left side brake light is made by two bulbs while the right side only contains one.
The left and right brake lights are the important part of the rear lights, which are distributed left and right in the rear lights on both sides, the color of which is red. And as we all known red color usually means warnings or alert. Lights will be turned on as soon as the brake is depressed. The brake light is to prompt the following drivers to slow down or stop their vehicles so that the following vehicles can be prepared for an abnormal affair or emergency in advance. Current brake lights can also be divided into fog lights, which can penetrate thick fog. LED lights can also be used as brake lights.
The high-position brake light is generally installed on the upper part of the rear of the vehicle, so that the drivers following behind can easily find the brakes of the vehicle in front of them, which serves to prevent rear-end collisions. The function of high brake light is to warn the vehicles behind, so as to avoid rear-end collision. The brightness of braking light of Vehicles without high brake lights, especially cars and mini cars with lower chassis due to the lower position of the rear brake lights, is usually not sufficient. When the vehicles follow them, especially trucks and buses with higher chassis, the drivers of them sometimes find it difficult to capture the braking light clearly. Therefore, the hidden potential of rear-end collision accidents is relatively high. A large number of research and investigation results have proved that high-level brake lights can effectively prevent and reduce rear-end collisions. Therefore, high-level brake lights have been widely used in many developed countries. For example, in the United States, according to regulations, all new cars sold since 1986 must be equipped with high brake lights; all light trucks sold since 1994 must also be equipped with high brake lights.
The reversing light is automatically turned on when the driver puts on the reverse gear. It is white and a little bit transparent sometimes, the function of that is mainly to remind the vehicle behind that the vehicle in front of them is reversing the car. Thus the drivers following the car can be informed and prepared to the current situation.
The reflective strip is usually in the rear of the car, it is reflective. When the car behind comes, no matter which direction it is, it can reflect the light back along the original direction and this can alert the driver behind. Thanks to the material the reflective strip, the Audi lights follow the laws of physical light right-angle original reflection. And this kind of basic science can guarantee that the drivers along the road can detect the lights and make well preparation for the risks.